Description
High quality weatherproof 3-toggle electrical switch plates are made in USA and feature a moveable handle that flips the three switch up and down securely. These outdoor toggle plates include a heavy duty gasket for use in wet or damp locations to provide a tight seal against the elements.
Features
- solid aluminum; .040" thick; white or gray baked enamel finish
- heavy duty die cast handles
- heavy duty universal gasket
- made in America - both faceplate and gasket
- UL and CSA listed 883 C
- 6.38" W x 4-1/2" H x 5/32" D
- screw holes spaced at 2.375" CC and 3.281" CC (center to center)
- the cover mounts to the device with the 2.375" spaced screws and the brass tube spacers
- the 3.281" spaced screws go through both the cover and the device to mount directly into the box
- includes two 1/2" and two 1" stainless steel plus two brass spacers
- includes black gasket UL listed for wet locations
- suitable for wet locations - use with sealing compound to ensure a weather-resistant installation
- can be used with any toggle switch - strap ears must be cut off prior to mounting on plate
Installation Instructions
There are two steps for installing the switches with this type of cover.
1. The ears or tabs on the toggles must be snapped off at the score lines.
2. The brass spacer tubes must be used to set the toggle switches back from the cover.
Note there are two sets of screw holes on each gang - an inner set (2.375" on centers) and an outer set (3.281" on centers).
First, install the switch to the cover using the inner set of screw holes: the two screws go into the cover, into the brass tubes, and then into toggle switch to secure the switch to the back of the plate. Next, screw the plate with the attached toggles into the box using the outer set of screw holes.
A small diagram is included in the packaging as well.
