Description
Looking for a more affordable way to update your vintage Touch Plate Lighting Control panel? If you have an old MRU-6 or RU-6 panel and it is completely isolated from all other wires in your system (no shared common wires, etc.) then this DIY replacement panel option may be a good choice for you. These sets contains the relay board, the low voltage board, DIN rail with mounting screws, and a RJ-485 cable for connecting the two boards. The transformer is included within the relay board. You will need to drill your own holes for mounting the hardware in your own cabinet.
Upgrade to the streamlined Touch Plate ZoneZ. This new eight-relay board is specifically designed to retrofit previous Touch-Plate relay panels installed between 1940's and 1990's. These new panels are fully assembled before delivery and include new transformers, relays and power supplies. New features include LED pilot light functionality, Master "all ON" or "all OFF" relay function, as well as electronic stuck switch protection. Compatible with all contact closure Touch Plate switch stations, and can be used to retrofit 3 wire low voltage systems such as GE, Remcon and Bryant.
These made-in-America relay boards are designed to adapt to most previous panel locations, which will save on costs for labor and material. Easy to install and includes a 1 year warranty and 3 years free phone support.
These 8-relay boards are built per order, please allow 2-3 weeks lead time. These MADE TO ORDER relay panels cannot be returned or exchanged.
Note: You would have to upgrade your old Master Control Station if you have the older versions with the lighted buttons due to voltage incompatibility with the new boards. (The newer versions of the control stations have small LED lights next to the buttons. These would be compatible with this kit.)
Features
- includes relay board, low voltage board, DIN rail plus mounting screws, RJ-485 cable that connects the two boards
- eight 20 amp 2-wire electronically held relays
- load types: incandescent, fluorescent, LED, magnetic low voltage, electronic low voltage
- each relay can support up to 1920 watts
- Relay Board (3.25 x 9 inches) on right
- Control Board (2.17 6.75 ? inches) on left
- basic & master on/off control per 8 relays
- fits inside MRU6 OR RU6 enclosures only - does not fit into older tubs because location of low voltage/line voltage barrier does not provide enough space to fit wider size of this module
- 120V transformer is part of the relay board
- compatible with all Ultra, 5000, Classic, Genesis, Eclipse, Mystique and Royal Touch Plate series
- LED control and stuck switch protection
- 12.5" long by 8" wide x 3.5" deep minimum cabinet size requirement
- no cabinet included
- can be upgraded later to replace relays with dimmers, or to add smart control/timing with purchase of a Time-keeper panel and reprogramming of the control board
- includes 1 year warranty & 3 years phone support
- an installation manual is included
- made to order with 2-3 weeks lead time
- manufactured in USA
Installation Notes: The line voltage wires get connected in via a screw terminal. The hot comes in the bottom and there are jumpers which connect the rest of the hot up the 8 relays. The load wires then come out spots 1-8 for the 8 relays.
If you prefer, you may buy a complete Touch-Plate Electrical Lighting Control Panel that is all set up and easy to install.
Find more Low Voltage Lighting Components.
