Description
Add engraving to tag eight caps on these eight-button LED pilot-lighted Touchplate Mystique low voltage switch controls. Lettering will help identify the function of each switch making it easy and convenient to control lighting areas for residents and visitors alike. Lettering is engraved directly onto each button so it cannot rub off.
Engraving Features
- Engravable on each button switch with up to 10 characters over two stacked lines (up to 5 characters on each line)
- Note - engraved characters include letters, spaces, punctuation
- When entering text to be engraved: LINE 1 = BUTTON 1; LINE 2 = BUTTON 2; etc. (Please add note during checkout if it is not clear where the separation is).
- Letting will be centered: For ex., 1 line of 2 characters will be arranged in the middle vertically and horizontally
- Contrasting letters - gray engraving letters on white, ivory or light almond switches; white lettering on black switches
- Choose switch unit color: white, ivory, black, or light almond
- Special order item - about 3 weeks lead time
Switch Features
- 8 engraved 7/16" square buttons
- buttons can be easily swapped or rotated if installing plate horizontally
- lighting solution for 2-wire low voltage system
- 1 amp at 28 volts contact rating
- 8 momentary contact light switches; dry contact
- 2 green LED lights - illuminated when on
- 4-7/8" high x 3-1/8" wide by 1/4" deep cover plate
- 4-5/8" high x 2-13/16" wide sub plate
- fits a 1-gang box
- sub plate has box-mount screw hole placement of 3-9/32"
- includes two 1" installation screws for subplate
- previous part number MYS-8B-8L
- American made
Q & A
Q. Is this a low voltage 3-way switch with pilot light?
A. Yes, it is. You will wire the switch in parallel to the relay it is controlling. So for that reason, you could have an unlimited number of switches controlling the same light. The relay just responds when receiving a signal from any of the switches it is hooked up to.
Q. I currently don't have pilot light functionality on my switches. Will these control stations provide it?
A. Not likely. Pilot light functionality requires an extra wire in the walls plus a Pilot Light Power Transformer 6V for each pilot light. If you do not currently have that extra wiring then it would have to be run through the walls first.
