Description
Touchplate's two-wire Innova 3 LED lighted low voltage switch station features 3 white momentary push button switches with LED lights for indicating lights or equipment are running. Update vintage type Touch-Plate 3-button lighted units with this modern low voltage switch.
Features
- 2 wire low voltage system for both commercial and residential environments
- 4 amp @ 28 volts switch contact rating
- 3 momentary contact switches; dry contact; single pole, single throw
- each switch has a separate common wire
- switches send an analog/contact closure response
- 10-24VDC LED power
- 18-20 AWG wire type
- buy Touchplate screwless wall switchplates
- industrial grade buttons
- medium-sized square push button switches
- environment 0 - 140 degrees F in non-condensing atmosphere
- two 1" mounting screws included
- add the free Touch-Plate wiring instructions if needed
- clear buttons that light up when on
- switch cap engraving service available - please contact us
- made in USA
Find more Touch-Plate electrical switch styles and wall covers at Low Volt Touchplate Switches and Wallplates.
Q & A
Q. Is this a low voltage 3-way switch with pilot light?
A. Yes, it is. You will wire the switch in parallel to the relay it is controlling. So for that reason, you could have an unlimited number of switches controlling the same light. The relay just responds when receiving a signal from any of the switches it is hooked up to.
Q. I currently don't have pilot light functionality on my switches. Will these control stations provide it?
A. Not likely. Pilot light functionality requires an extra wire in the walls plus a Pilot Light Power Transformer 6V for each pilot light. If you do not currently have that extra wiring then it would have to be run through the walls first.
