Description
These Touch-Plate system low volt relay rubber gaskets will replace old or crumbling rubber gaskets on Touch-Plate low voltage relays such as Touchplate 3000 low voltage relays such as the sample shown.
- package of one grommet
- 1.75" x .5"; deep with 1" opening that slides over solenoid relay cylinder
- 1/8" wide interior channel
- slotted edge; slightly flexible; used for holding relay in place in electrical box
- replaces part RGB-2872
Click Low Voltage Switchplates and Electrical Switches for replacement parts and wiring diagrams.
Q & A
Q. How can I install the rubber grommet in the hole?
Generally, it can just be squished a little to get it in. The other method would be as follows: Wrap a nylon string around the groove of the grommet. Put one side of the grommet in. While you are pushing it in, pull on the nylon string to pull the edges down and get it into the groove.
Generally, it can just be squished a little to get it in. The other method would be as follows: Wrap a nylon string around the groove of the grommet. Put one side of the grommet in. While you are pushing it in, pull on the nylon string to pull the edges down and get it into the groove.
