Description
Use this recessed 2-gang dual keystone data jack wallplate to provide low profile access to data jacks and telecom connectors. These sunken data jack ports are designed for any location where you'd like to have the plate flush with the wall while bulky jacks are tucked into the recessed area rather than sticking out. Great way to keep cords and cables close to the wall behind furniture, bedding, or computer equipment.
Plate Features
- four empty keystone ports at back of two recessed areas
- 4-9/16" W x 4-1/2" H x 13/16" D metal plate with set back connector access
- front recess depth of .75" from surface of wall plate (3/8" to face of your jack when installed)
- each internal recessed area is 2-11/16" H x 1-1/2" W at the face tapering to about 2-1/4" H x 1-3/8" W at the base
- 3/4" x 9/16" keystone ports for Leviton modular jacks or Hubbell data jacks
- four 1/2" white mounting screws provided
- screw holes spaced 3.281" apart center to center vertically for installing on two-gang wall box
- steel plate with glossy white enamel finish
- wall plate cover made in USA
NOTE: Please allow for the additional needed clearance for your inserted USB cable and cord bend.
Need an oversized (6x4") recessed data plate? Add a double-gang wall plate expander underneath.
Shop for phone and data communication jacks to create the combination you need.
Note: Leviton jacks are a tight fit. Push a set of corners through the cutout to start the jack, then push the rest of the jack into place.
