Description
This ivory low voltage rocker switch can be used to replace a single 3-wire (GE, Bryant, Sierra) 24 volt low-voltage light switch. This modern switch will match the look of contemporary paddle switches to allow for more wall plate finish choices. Fits in a Decora rocker GFCI switch plate.
Features
- 3A-24 volts AC/DC 3-position momentary contact
- ivory face 56081-I by Leviton
- for 3-wire low voltage wiring system including GE, Bryant, Remcon, Sierra versions
- SPDT single pole double throw center off
- depth of switch from mounting strap to back: 1.16"; face of switch from strap to high point on rocker: 0.45"
- commercial grade Decora Plus rocker
- heavy duty momentary contact rocker style switch
- neutral position is in middle (neither up or down) - snaps back to the center position when released
- back and side wiring terminals to accept both stranded and solid connectors
- may use as a manual override switch for relay driven systems
- limited 10-year warranty
- produced in Mexico
Find more low voltage lighting components.
Historical Systems: When connecting to a GE low voltage relay for a SPDTCO (single pole, double throw, center off) installation, look at the front of the switch with "LEVITON" visible at the bottom of the rocker switch. Connect the red ON wire to the top brass screw on the right (ON), connect the black OFF wire to the lower brass screw on the right (OFF), and connect the white common wire to the screw on the top left. Check the contacts with an ohmmeter if you are not sure your wires are following this convention.