Description
Ivory plastic switch plate extension lifter will raise the switch plate 3/4" off the wall, great to cover electrical boxes that are raised and stick out of the wall. Works with any single gang standard size switch plate and most electrical devices including toggle switches, rocker switches, GFCI outlets & duplex outlets. Be sure to check dimensions of your device to be sure it will fit within the inner opening.
Features
- 5" H x 3.25" W x 3/4" D
- inner opening 2-7/8" H x 1-13/16" W
- raised surface for mounting switch plate 4-5/8" H x 2-7/8" W
- covers 1/4" protruding electrical boxes
- 6197-I by Leviton, gloss ivory
- available in 2 other colors
- 2 long 1-5/8" screws included
- screw holes 3-9/32" apart, mounts to electrical box
- can be used with deep light switchplates for added depth
- UL listed, CSA certified
- made in USA
Need to cover a gap larger than 1/4"? Shop extra deep coverage wall plates or use stackable depth rings to create any depth you need.
Installation Instructions
Turn off power to the device.
Unscrew the electrical device from the box if currently installed.
Pull the device through the center of the extender ring and set the device on top of the extender ring.
Using the long screws provided, thread the screws through the device holes, the extender ring holes and then into the electrical box.
Once the device is mounted on top of the box, screw your wall plate into the device screw holes.
Restore power to the device.