Description
Install this short trimmed off rocker outlet plate on wall boxes that are mounted too close to tiles, solid surface counters, moulding or cabinets on either the top or bottom edge.
Does it fit? Measure from the center of the screw that is holding the device in the electrical box to the edge of the blockage. If 7/16" (11.1mm) or more, the cover will fit.
Features
- 2-3/4" W x 4-1/2" H x 5/32" D
- 2 matching 1/2" ivory screws
- half short plate similar to a 4" rocker switch cover but short on one side only
- American made; Kyle Switch Plates exclusive design
- decor opening fits all decorator style devices - rocker, slide dimmer, Dacora, GFCI, block and Decora switches (Decora is a Leviton trademark term)
- shortie outlet cover has one end length trimmed off by 3/16"; still covers the strap tabs on the electrical switch
- all four sides completely finished with beveled edges
- on short side, 7/16" (11.1mm) from center of screw hole to edge of plate
Installation Note: Because one edge is trimmed down, the screw hole spread is box mount (3.281") rather than standard strap mount (3.812"). To install the cover, use the same screws to mount both the cover and the device directly into the electrical box.
