Description
Short Duplex Electrical Outlet Cover Plate is Trimmed 1/4" on One Edge
Finally! A great solution for socket plugs in tight locations where cabinets, granite, or tile are squeezed right up against either the top or bottom of a 1-gang electrical wall box. Trimmed off by 1/4" on one end, these offset half short outlet covers are designed to align with one edge (top or bottom) of the electrical box. All four sides have neatly-finished beveled edges. Short receptacle cover faceplate may be rotated by 180 degrees to orient the trimmed edge against obstacles that are either above or below the electric box, for example, granite backsplashes or cabinetry.
Features
- American made trim plates
- the center screw hole is 2.0" from one end and 2.5" from the other end; use these measurements to determine if the plate will fit
- your outlet may be shifted slightly up/down to help the plate fit: check if it is pushed as far away from the obstruction to for maximum distance
- Kyle Switch Plates exclusive design
- metal wall plates
- 2-3/4" W x 4-1/2" H x 5/32" D
- 1 matching 1/2" screw
Solutions
- Shop more short covers here.
- Need a deep half-short outlet plate? You can add an 1/8" extender ring if you snap off the ears on the outlet strap.
