Description
Half Short Decor Rocker Cover Plate - Light Almond
For single electrical boxes mounted too close to tile, moulding or woodwork, install this short trimmed cover plate with an offset rocker opening.
Does it fit? Measure your device from the center of the screw that holds it in the electrical box to the edge of the obstruction. If distance is 7/16" (11.1mm) or more, it will fit.
Features
- short side is 7/16" (11.1mm) from center of screw hole to edge of plate
- flip plate around to have shorter edge on top or bottom
- light almond cover with matching .5" screws
- 4.5" H x 2.75" W; bevel is 5/32" deep
- short on one side only
- USA-made metal wall plate
- device opening fits all decorator style devices - rocker, slide dimmer, Dacora, GFCI, block and Decora switches (Decora is a Leviton trademark term)
- covers the strap tabs on the electrical switch or outlet
- all sides completely finished with smooth beveled edges
Installation Note: Offset openings require the screw holes to be 3.281" (box mount) instead of 3.812" (strap mount). The same screws will go through the cover plate and the electrical device, mounting both to the handy box at the same time, with the same screws.