Description
Short trimmed 4-toggle switch white wall plates will cover up a 4-gang electrical box that is positioned too close to the underside of a cabinet, or too close to the top edge of a backsplash or countertop. Short on one edge, these white trimmed four toggle wallplates can be flipped over to be short on either the top vs. the bottom depending on how you install it. All the device and screw positions are still in standard positions so no adjustments are needed. Wall plates cover any four standard toggle switches - even toggle light dimmers.
Features
- American-made metal 4-switch wall plates
- .030" white enameled steel
- rotate to use the short side on either the bottom or top
- 8.19" W x 4.5" H x .16" D with attractive beveled edges on all four sides
- distance from cover edge to toggle opening is 1-17/32" on one side (top or bottom) and 2-1/32" on the other
- regular device-mount screw hole positions - 2.375" center to center (vertically) and 1.813" (horizontally on gangs)
- Kyle Switch Plates exclusive custom size - produced in metal only (no plastic)
- eight matching 1/2" white slotted installation screws
