Description
Replace a vintage 3-pilot light GE low voltage light station with this Touchplate six-button control unit for a fresh new look. These units are designed with three pairs of buttons that correspond to the two directions on the vintage GE teeter-totter switches or the more-recently discontinued double square pushbutton switches where one button/one direction was ON, the other button/direction was OFF. Choose from white, almond or ivory for a stylish solution to refresh your existing low voltage set-up. Each switch station has 3 pairs of 1/2" square button caps.
Features
- this 6-button unit is an alternative solution to replace a control station with three GE low voltage pilot light switches
- unit can be mounted vertically or horizontally
- replaces two RS237P, RS232P, RS239P, RTS-8, RFS-8, RCS2PL, etc. switches in GE, Bryant, and Sierra systems
- note: RR9 pilot light relays are required to power the LED lights; please be sure you have the extra wiring and the RR9 pilot light relays installed
- 2 wire switches easily adapted to a 3-wire system by doubling the number of buttons with pairs of ON/OFF buttons
- note: all three relays connected to switch station must be the same brand
- pilot lights with 3 green LED bulbs that light up when the connected fixtures are ON. (Other three LED's on lower/OFF buttons will never light up.)
- 1 amp @ 28 volts switch contact rating
- 6 momentary contact switches (3 pairs) designed with reverse polarity to be compatible with GE/Bryant/Sierra systems; dry contact
- easy to install with the free 3 wire to 2 wire low voltage conversion guide included
- 4-1/2" x 2-3/4" plastic screw-less light switch cover
- 2" x 1-9/16" switch cutouts
- 3-9/32" screw hole spacing center to center in metal yoke
- back depth is 5/8"; overall depth is 15/16" from front of button to back of terminal bar
- two 1" installation screws - mounts to a standard 1-gang box or 1-gang low voltage mounting ring
- American made
- cannot be used side by side in a 2-gang box: instead order a GE Replacement Classic 6 Pilot Light Control Station to replace 6 GE switches on a 2-gang box.
- WHITE IS STOCK; IVORY AND LIGHT ALMOND ARE SPECIAL ORDER WITH A 3-WEEK LEAD TIME
Click Low Voltage Replacement Devices for relays, transverter power supplies, and more switch options.