Description
Freshen up two old GE low voltage pilot lighted switches on a single gang with this Touchplate Ultra four-button control station. These units are designed with two pairs of buttons that correspond to the two directions on the vintage GE rocking light switches or the more-recently discontinued double square pushbutton switches (one button/one direction was ON, the other button/direction was OFF). Conveniently designed to fit into modern Decora wall switchplates so you may use oversized covers or specialty finishes when removing obsolete master control panels, too.
WHITE AVAILABLE FOR PREORDER - EST. 5/3/24 RELEASE DATE
Features
- this specially-built 4-button unit is an alternative for replacing a control station with two GE low voltage pilot lighted switches (with GE RR9 pilot lighted relays connected to them)
- replaces a two RS237P, RS232P, RS239P, RTS-8, RFS-8, RCS2PL, etc. switches in GE, Bryant, and Sierra systems
- note: RR9 pilot light relays are required to power the LED lights; please be sure you have the extra wiring and the RR9 pilot light relays installed
- note: both relays connected to this unit must be the same brand
- 2-wire switches easily adapted to a 3-wire system by doubling up the number of buttons to create pairs of ON/OFF buttons that correspond to the vintage rocker directions or the double-button RS2 series switches
- unit fits a standard 1-gang box and may be installed horizontally or vertically per your current box installation
- use two units on a 2-gang box, etc., to create a replacement for a vintage 4-switch unit; use multiple units to create larger multi-switch panels
- fits in any Decora wallplate opening for single to multiple-gang installations including Touch Plate single-gang wall plates or Touch Plate double-gang wallplates
- 4 momentary contact switches, 1A 28V rating
- each ON button has a pilot light with 1 small green LED bulb next to it (Note the OFF button LED do NOT illuminate)
- free 3 wire to 2 wire low voltage conversion wiring instructions to make installation easy
- standard box mount screw holes with 3-9/32" spread on standard gangs (1.8125" apart on centers)
- two 1" installation screws
- manufactured in U.S.A. especially for GE/Bryant/Sierra systems using original pilot light relays
- white is stock; almond, ivory, or black available for special order
Click GE Low Voltage Light Switch Replacement & Upgrade Options for relays, transformers, light switches, power supplies, and more.
