Description
Replace a 2-gang midcentury 4-switch GE low voltage switch plate unit with this Touch Plate Classic eight-button switch station for an updated look. These double-gang units are designed with four pairs of buttons that correspond to the alternate directions on the vintage GE mini rocking switches or the dual square pushbutton switches - top button/up direction was ON, the lower button/down direction was OFF. Choose from white, almond, or ivory (or black by special order) for a stylish solution to refresh your vintage low voltage set-up. Each switch station has four pairs of 1/2" square button caps.
Features
- replace a 2-gang unit with four GE low voltage switches with this eight-button control unit
- alternate solution for replacing two discontinued RS237, RS232, RS239, RTS6, RFS, etc. switches in GE, Bryant, Remcon and Sierra systems
- top row of buttons are the ON switches, bottom row of buttons are the OFF switches
- ON & OFF NOT PRINTED ON SWITCHES - in photo only for explanation (order ON/OFF button caps separately if needed)
- 2 wire switches easily adapt to a 3-wire system by doubling the number of buttons creating pairs of ON/OFF buttons
- note: all four relays connected to switch must be the same brand
- 1 amp @ 28 volts switch contact rating
- 8 momentary contact switches; dry contact
- includes free 3 wire to 2 wire low voltage conversion guide to make installation easy
- fits a 2-gang box
- 4-1/2" x 4-1/2" plastic screwless light switch plate
- 2" x 1-9/16" switch opening holes
- 3-9/32" screw hole spacing in metal bracket
- back depth is 5/8"; overall depth is 15/16" from front of button to back of terminal bar
- four 1" mounting screws for installing yoke to box, screwless plate presses on
- made in USA
Click Low Voltage Light Switch Replacement Devices for relays and more switch options.
