Description
Touchplate's engravable Innova 3 switch LED lighted low voltage control station features 3 clear momentary push switches with LED lights for letting you know lights or equipment are running. Update vintage type Touch-Plate 3-button lighted units with this modern low voltage switch. Each button cap can be engraved with up to two lines with 6 characters in each.
Two weeks lead time for engraved items.
Features
- 2 wire low voltage system for both commercial and residential environments
- 4 amp @ 28 volts switch contact rating
- engraved in dark gray with up to six characters on each of one or two lines per button
- BUTTON ONE: enter characters on line one and two (if needed)
- BUTTON TWO: enter characters on line three and four (if needed)
- BUTTON THREE: enter characters on line five and six (if needed)
- if only one line is needed on each button enter text in LINE 1 and LINE 3 and LINE 5
- text will be centered vertically and horizontally
- 3 momentary contact switches; dry contact; single pole, single throw
- each switch has a separate common wire
- switches send an analog/contact closure response
- 10-24VDC LED power
- 18-20 AWG wire type
- buy Touchplate screwless wall switchplates or and Decora style wall plate
- industrial grade buttons
- medium-sized square push button switches
- environment 0 - 140 degrees F in non-condensing atmosphere
- two 1" mounting screws included
- add the free Touch-Plate wiring instructions if needed
- clear buttons that light up when on
- switch cap engraving service available - please contact us
- made in USA
Find more Touch-Plate electrical switch styles and wall covers at Low Volt Touchplate Switches and Wallplates.
Q & A
Q. I need a low voltage 3-way switch with pilot light. Will this work?
A. Yes, just wire two or more switches in parallel to the relay - each will be able to control the same light. The relay responds when it receives a signal from any switch hooked up to it.
Q. Will these control stations provide pilot light functionality if I don't currently have it on my switches?
A. Unlikely. Functional pilot light requires a Pilot Light Power Transformer 6V for each pilot light and an extra wire in the walls. If you do not currently have that extra wiring then it would have to be run through the walls first.
