Description
Deep Raised 4 Rocker Wall Plate Covers for Protruding Electrical Boxes
If your four-gang electrical box is protruding from the wall, these 5/16" extra deep triple GFCI Decora rocker switch plates can be used for covering 4 Decora devices - rocker switches, modern slide dimming controllers, decorator receptacles, etc. Use on walls where paneling was removed, thin drywall was installed, or where electrical boxes were mounted in shallow walls because of obstructions behind the box.
Features
- sold white enamel finish on .030" thick steel
- box mounted - 3.281" screw spread because of wide beveled edges
- made in America
- 8-3/16" W x 4-1/2" H x 5/16" D
- 8 matching 1" oval head screws; length appropriate if plate fits against box; order longer screws if you are raising the plate away from box
- opening fits all decorator controls - rocker, GFCI, dacor, block and Decora style devices (Decora is a Leviton trademark term)
Note - because of steeply beveled edges, screws holes are set at box mount spacing - screw through plate, through device strap, then into wall box.
Price reflects the extra work this custom plate requires. The stamping die must be taken apart to move the screw holes to the box mounting position instead of the normal strap mounting position, so all openings must be punched separately.
