Description
Find deep raised 1 Decora rocker cover plates for bulky Smart home automation systems
Cover shallow wall boxes or deep home control units with these fresh light almond light switch plates.
Features
- light almond enamel finished steel, .030"
- outlet cover plate fits decorator electrical devices - home automation controls, block outlets, slide dimmer switches, decor rockers and other decorator electrical devices
- American-made specialty size - Kyle Switch Plates exclusive
- 2-3/4" W x 4-1/2" H x 5/16" D
- 2 light almond 1/2" screws - length appropriate if plate fits against box; order longer screws if you are raising the plate away from box
- note - screw holes are placed 3.281" apart center to center (rather than standard strap mount at 3.812") because of steep beveling
IMPORTANT INSTALLATION INSTRUCTIONS: Screw position is modified on these popular deep light almond plates because of steep bevel on edges. Screw holes are set at 3.281" box mount spacing (rather than strap mount spacing of 3.812" as is typical). To install, insert screw through switch plate, through device strap, then into electrical box with the same 1/2" screw. If your plate will be floating above the box (not touching it) because of bulky devices, you will need to order longer screws.