Deep 2 Decora Rocker GFCI Switch Plate Cover

This extra deep switch plate, in combination with the spacer purchased from Kyle, had enough depth to give a finished look to the protruding work box.

The deeper plate has worked very well in my 100 year old kitchen. The elec boxes are mounted in cinder block and the receptacles stuck out just enough that the plate was not totally secure at the bottom, so I had to hold the plate in place and pull the plugs out "hard". Now with the extra deep plate and using the longer screws where needed (order them as a separate item!) I don't have to "hold and pull" anymore.

Solves my problem of switch extended out beyond box. Covered both switches with no gap between switch and wall

Very well made worked as advertised.
Shipping was fast and well packaged.

Worth the extra expense (IMO) to enable installation of a pair of relatively bulky Wemo switches in an older house with smaller electrical box to house them. I was worried that it wouldn’t work. But it worked perfectly and looks great (ie it looks completely unremarkable, which is what you shoot for).

Ensure to measure the gap properly and buy the proper size to cover the gap. 5/16 worked for my situation.

This switch plate worked perfectly to conceal the gap between the switch and the wall, expensive but it's the cost of being able to fully complete a makeover or improvement of a room in my opinion.
STAFF: We're glad these plates worked out for you. Note: because of the deep bevel the screw holes on deep Decora plates must be moved to the box mounting position. This requires a two-step punching process, hence the price difference between these and other sizes that can be made in a single pass.

Got this because I had two smart switches that were too large for the standard wallplate. This plate fit perfectly and the switches look great now.

Expensive, but worth it! Caveat: read the product description carefully !

Did the job perfectly.