Description
Short Double Rocker Outlet Switch Plates Are Only 4" Tall
These extra short 4" double rocker lightswitch covers are trimmed off on both the top and the bottom yet still have beveled edges on all four sides. They are designed for tight spaces under cabinets or on backsplashes where there is not enough room for regular plates. Perfect for situations where electrical boxes are mounted up against tiling, brick, door jams, pedestals, window frames, cabinets, or bookcases. If you have a combination plate with a toggle switch or duplex receptacle, we recommend updating your electrical switches to the modern decorator type to accommodate your specialty installation.
Features
- custom plate - hand cut and welded; manufactured in USA
- 4" H x 4-1/2" W x 5/32" D metal wall plates with four beveled edges
- distance between device opening and outer edge is 0.72" (23/32") on both sides
- distance from center of screw hole to side edge of plate is 1.375" (1 3/8")
- distance from center of screw hole to top (or bottom) edge of plate is 0.344" (11/32")
- 4 matching 1" installation screws for box mounting
- all openings are in standard locations to fit your current devices - only the overall height of the plate in shorter
- short Decora rocker trim plate is not produced in plastic - custom size is Kyle Switch Plates exclusive
- standard Decora opening: 1 5/16" W x 2 5/8" H
- openings designed for all brands of decorator rocker, timer, GFCI, block, and Decora style devices (Decora is a Leviton trademark term)
Installation Note: The screw holes are set at box mounting distance (3.281") instead of standard strap mounting (3.812") because of the trimmed off edge. So when installing, you use the same screws to install both the plate and the electrical device directly into the box.
