Description
Half Short 1 Rocker Wall Plate Cover for Decora Switch or Outlet - Trimmed by 3/16" Inch
Trying to find a short trim plate that will cover an electrical box that is installed too close to tiles, solid surface counters, moulding or cabinets on either the top or bottom edge? This one-gang short rocker switch plate still covers your electrical box with an installed Decora rocker switch, GFCI outlet receptacle, or decorator dimmer. These short rocker switch plate covers are the perfect solution when working in tight spaces.
Does it fit? Measure from the center of the screw that is holding the device in the electrical box to the edge of the blockage. If 7/16" (11.1mm) or more, the cover will fit.
Features
- 2-3/4" W x 4-1/2" H x 5/32" D
- 2 matching 1/2" screws
- half short plate similar to a 4" rocker switch cover but short on one side only
- American made; Kyle Switch Plates exclusive design
- decor opening fits all decorator style devices - rocker, slide dimmer, Dacora, GFCI, block and Decora switches (Decora is a Leviton trademark term)
- standard Decora opening: 2.625" H x 1.312" W
- shortie outlet cover has one end length trimmed off by 3/16"; still covers the strap tabs on the electrical switch
- all four sides completely finished with beveled edges
- on short side, 7/16" (11.1mm) from center of screw hole to edge of plate
Installation Note: The screw hole spread is box mount distance (3.281") instead of standard strap mount (3.812") because of the trimmed edge. So when installing, you use the same screws to mount both the wallplate and the electrical device directly into the box.